Retinoblastom - Forum

 
Sie sind nicht eingeloggt.
LoginLogin Kostenlos anmeldenKostenlos anmelden
BeiträgeBeiträge MembersMitglieder SucheSuche HilfeHilfe
VotesUmfragen FilesDateien CalendarKalender BookmarksBookmarks
hp printer in an error state

Anfang   zurück   weiter   Ende
Autor Beitrag
princezlato90
Mitglied

Beiträge: 57

New PostErstellt: 06.01.22, 19:41  Betreff: hp printer in an error state  drucken  weiterempfehlen Antwort mit Zitat  

The printer is not printing black and white documents, this is a big issue. Some people immediately start searching the Internet for nearby printer service centre phone numbers. Calling them means that you may have to spend several dollars to fix a printer, printer cartridge or other silly issues. Yes it’s true Sometimes, this issue is minor and can be resolved with little printer knowledge. So, before calling, read these tips below to fix the black and white print out issue: hp printer not printing
hp printer not printing Turn off your printer, unplug from the power source and simultaneously disconnect the USB cable. After a few moments, reconnect your printer and plug it back in. Then, turn your printer back on.
You can usually find this option on your printer’s display screen. Or, check your printer’s user guide for step instructions.
Check the printer ink level to double the amount of ink in your cartridge. If you are using aftermarket cartridges that do not show ink levels, we need to find another way to determine if your ink cartridge is at fault.
Check your ink cartridge:- hp printer not printing
  1. Replace ink cartridges that are low or empty on the ink.
  2. Make sure the ink cartridges are fried in place and properly installed in their proper slots. hp printer in an error state
  3. Double check to make sure that you have installed the new cartridge, then you have removed the tape on the vent.
  4. Check if the cartridge vents are closed. You can fix this by using a pin to clean the clog on the vent.
  5. To determine if your printer is capable of identifying cartridges, try using a different ink cartridge. If your printer worked with an older cartridge, try to install that old cartridge again and see if your printer produces any kind of output — any gray will shed. We only need to determine if it is the cartridge or the printhead that is causing the problem. If your printer is capable of printing something with an old cartridge, it is not a printhead. Rather, your new black cartridge may be defective and will have to be replaced.


nach oben
Benutzerprofil anzeigen Private Nachricht an dieses Mitglied senden
Sortierung ndern:  
Anfang   zurück   weiter   Ende
Seite 1 von 1
Search

powered by carookee.com - eigenes profi-forum kostenlos

Layout © subBlue design