Retinoblastom - Forum

tai tai · Gast

QL Double Beam Electromagnetic Bridge Crane with carrier beam mainly consists of bridge, crane traveling mechanism, trolley, long carier beam, electric equipment and electromagnetic chuck.

Applied to lifting and transferring big steel ingots, continuous casting plates and heavy steel plates

Basic parameters of QL Electromagnetic Overhead Crane
Type: QL
Lifting capacity: (7.5+7.5)~(20+20)t
Span: 22.5~34.5m
Max lifting height: 16m
Working class: A6,A7
Temperature: -25～+40℃
Good quality, high production effeciency, few maintance;

High loading strength, high working class;

Flexible operation, safe and reliable.

There are two carrier-beam: one is vertical to main girder, one is parallel to main girder. You can choose you need.

QL Electromagnetic Overhead Crane

QL Electromagnetic Overhead Crane Features
(1) In General

Good quality, high production effeciency, few maintance;
High loading strength, high working class;
Flexible operation, safe and reliable.
(2) Main Body

Double girder, welding box beam, camber meet national standard;
Adopt high quality carbon steel, Q235B or Q345B; (similar as Fe37 or Fe52);
Main welding submerged are welded automaticly, nondestructive flaw detection;
All metall materials(main girder,end girder, trolley)are chosed according to the national standard.
Steel plate material requirements shot blasting before cutting, derusting grade reach Sa2.5 above.
(3) Crane and Trolley

Crane protection grade is IP54 or IP44, F/H grade insulation
Use special reducer, Hard-toothed surface, Reducer shaft inspected by Ultrasonic testing;
Main hook’s reducer shell welding, taking a seal grooves, shaft top sealed well;
Use YWZ model electric&hydraulic pushing rod often-close brake, the main lifting use double brake;
Drum material is 16Mn, made of steel.drum shaft and cylinder body are welded and inspected by ultrasonic testing.
The wheel tread are treated by heating processing;
Pulley block are made of rolled steel;
The tooth shape coupling, and the material of the 40 Cr, forging steel;
All buffers use polyurethane (pu) type, on same span,
Buffers must have same height;
Hook use forged material, nondestructive flaw detection, fortify the slot device.
(4) Electric System

All electric are SIMENS & SCHNEIDER;
Crane can use safe slipping line to get power , slip line is located against the cab;
Wire ropes are put in the steel trough or metal tube;
On dangerous points equipped with protection device;
The wire ropes are closed in hard steel tube or metal soft tube, line pipe and trough are welded on crane’s metall construction.
Trolley’s cable devices are fixed inside of walking board;
Bridge lighting use special crane damping lamps. Set special lighting circuit.
(5) Protection Devices

The crane and trolley have travelling stop block, hook have double limiters,one of them is on drum
Crane equipped with audible and visible alarm, and slipping line protection device prevents any danger to person;
A cage is fixed on slip line side under the main girder,convenient to repair the slip line.
All of the connection axis, floating shaft all has the shield to prevent danger.
All doors on crane have interlock protection device, when the door is open,crane will stop travelling.
(6) Operation Device

Ground control and cabin control;
Special cabin for bridge crane or capsule driver room, open vision comfortable operation;
The cable has open style, close style, can fixed on left or right;
The open direction includes end open, side open or top open;
The cabin has special small room and the capsule cabin;
Ground control has handle and remote control; do not need to set up special driver;
Users can choose as you need.
QL Electromagnetic Overhead Crane Design Drawing
QL Electromagnetic Overhead Crane Design Drawing

QL Electromagnetic Overhead Crane Design Drawing-2

QL Electromagnetic Overhead Crane PDF

https://www.craneyt.com/ql-electromagnetic-overhead-crane-specifications-and-pdf.html